Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81510C
1.REMOVE FRONT TURN SIGNAL LIGHT BULB
| *a | Matchmark |
| *b | Unlock Position Mark |
|
Counterclockwise |
Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.
|
Push |
|
Counterclockwise |
|
Remove in this Direction |
Push the front turn signal light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the front turn signal light socket.
81510C
2.INSTALL FRONT TURN SIGNAL LIGHT BULB
| *a | Protrusion |
|
Cutout |
Align the 2 protrusions on the front turn signal light bulb with the 2 cutouts of the front turn signal light socket and insert the bulb.
|
Push in this Direction |
|
Clockwise |
While pushing the front turn signal light bulb, turn the bulb clockwise to install the bulb.
| *a | Matchmark |
| *b | Unlock Position Mark |
| *c | Lock Position Mark |
|
Clockwise |
Align the matchmark of the front turn signal light socket with the unlock position mark, and then rotate the front turn signal light socket clockwise until the lock position mark to connect the front turn signal light socket.