Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › 2015.06–2015.11
RM33J0E _59 Vehicle Exterior _038498 LIGHTING (EXT) _0189318 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81560 1.INSTALL REAR COMBINATION LIGHT ASSEMBLY LH (w/ Deck)

a.

Connect the connector.


b.
E316926C01
0,0 0,0 false
V113147

Install in this Direction
V100155

Protective Tape


Attach the 2 clips to install the rear combination light assembly LH.


c.
E318125C01
0,0 0,0 false
V113146

Place Hands Here
V113147

Push in this Direction


Install the 2 bolts.

Torque:
4.0 N*m (41 kgf*cm, 35 in.*lbf)

HINT:

Place your hands at the location shown in the illustration and while pushing the rear combination light assembly LH indicated by the arrow, tighten the 2 bolts.



d.

Close the tail gate.


Hide 81560 2.INSTALL REAR COMBINATION LIGHT ASSEMBLY LH (for Deck-less)

a.

Install the rear combination light assembly LH with the 4 screws.


Hide 81550 3.INSTALL REAR COMBINATION LIGHT ASSEMBLY RH (for Deck-less)

a.

Install the rear combination light assembly LH with the 4 screws.


b.

Connect the connector.


Hide 75136 4.INSTALL REAR COMBINATION LIGHT BRACKET LH (for Deck-less, LH Side)

a.

Install the rear combination light bracket LH with bolt.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


b.

Connect the connector.