Home › Vehicle Exterior › LIGHTING (EXT) › STOP LIGHT SWITCH
RM33J0E _59 Vehicle Exterior _038498 LIGHTING (EXT) _0189326 STOP LIGHT SWITCH A

LIGHTING (EXT)  STOP LIGHT SWITCH  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 55606 1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 84340 2.REMOVE STOP LIGHT SWITCH ASSEMBLY

a.
E320314

Disconnect the connector.


b.

Turn the stop light switch assembly counterclockwise and remove it.


Hide 84345 3.REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

a.
E320315C01
0,0 0,0 false
V100155

Protective Tape


Using a screwdriver, detach the claw and remove the stop light switch mounting adjuster.

NOTICE:

The stop light switch mounting adjuster must not be reused.


HINT:

Tape the screwdriver tip before use.