Home › Power Source / Network › NETWORKING › LIN COMMUNICATION SYSTEM
RM33J0E _57 Power Source / Network _038493 NETWORKING _0189812 LIN COMMUNICATION SYSTEM D

NETWORKING  LIN COMMUNICATION SYSTEM  SYSTEM DESCRIPTION  


LIN COMMUNICATION SYSTEM DESCRIPTION


The LIN communication system is used for communication between the components in the tables below. If communication cannot be performed through LIN communication because of a break in the communication lines or some other reason, the master control ECU of the relevant system stores DTCs. Refer to the table below about the communication bus lines and connected components.

HINT:
·

Each component has a fail-safe function which activates to maintain the minimum performance of the system and protect the system.

·

In the following table, "○" indicates that the function applies, and "-" indicates that it does not.



Certification Bus Lines (w/ Smart Entry and Start System)
Component Master Control LIN Communication DTC Output Function
Certification ECU (smart key ECU assembly) ○ ○
Steering lock actuator or upper bracket assembly - -

Air Conditioning Bus Lines (for Automatic Air Conditioning System)
Component Master Control LIN Communication DTC Output Function
Air conditioning amplifier assembly ○ ○
Air conditioning control assembly - -