Home › Engine / Hybrid System › 2TR-FE ENGINE MECHANICAL › DRIVE BELT
RM33J0E _51 Engine / Hybrid System _038455 2TR-FE ENGINE MECHANICAL _0189925 DRIVE BELT G

2TR-FE ENGINE MECHANICAL  DRIVE BELT  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:
A343690

To prevent injury due to contact with an operating fan and generator V-belt or cooling fan, keep your hands and clothing away from the fan and generator V-belt and cooling fans when working in the engine compartment with the engine running.


PROCEDURE

Hide 16361A 1.INSPECT FAN AND GENERATOR V BELT

a.
A088649

Check the belt for wear, cracks or other signs of damage.

If any of the following defects is found, replace the fan and generator V belt.

·

The fan and generator V belt is cracked.

·

The fan and generator V belt is worn out to the extent that the cords are exposed.

·

The fan and generator V belt has chunks missing from the ribs.



b.
A346798C01
0.448,0.094 0.646,0.302 0.198,0.208 10 false *a 2.24,0.083 2.448,0.292 0.208,0.208 10 false *b
*a CORRECT
*b INCORRECT


Check that the fan and generator V belt fits properly in the ribbed grooves.

HINT:

Check with your hand to confirm that the fan and generator V belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the fan and generator V belt. Install a new fan and generator V belt correctly.



c.
A346799C01
0.844,0.875 1.031,0.875 1.031,0.875 1.208,1.813 true 2.375,0.542 2.563,0.542 2.563,0.542 2.75,0.885 true 0.906,3.094 1.094,3.094 1.094,3.094 1.448,2.677 true 2.875,1.313 2.979,1.844 2.979,1.844 3.094,1.844 true 0.646,0.771 0.833,0.969 0.188,0.198 10 false *1 2.167,0.427 2.354,0.625 0.188,0.198 10 false *a 3.125,1.75 3.344,1.958 0.219,0.208 10 true *b 0.719,2.99 0.906,3.177 0.188,0.188 10 false *c 2.313,1.219 2.469,1.417 0.156,0.198 10 false A
*1 Fan and Generator V Belt
*a Bracket Side Indicator
*b Arm Side Indicator
*c Tensioner


Check that the tensioner indicator mark is within range A shown in the illustration.

If the mark is not within range A, replace the fan and generator V belt.

HINT:

If a new belt has been installed, check that the tensioner indicator mark is within range A.



Hide 16620D 2.INSPECT V-RIBBED BELT TENSIONER ASSEMBLY

a.

Remove the fan and generator V belt.

Click hereEngine / Hybrid System>2TR-FE ENGINE MECHANICAL>DRIVE BELT>REMOVAL


b.
A350721

Check that nothing gets caught in the V-ribbed belt tensioner assembly by turning it clockwise and counterclockwise.

If a malfunction exists, replace the V-ribbed belt tensioner assembly.


c.
A346800C01
2.094,0.521 2.281,0.729 0.188,0.208 10 true *a
*a Turn


Turn the pulley, and check that the tensioner bearing moves smoothly and quietly.

If necessary, replace the tensioner pulley.


d.

Install the fan and generator V belt.

Click hereEngine / Hybrid System>2TR-FE ENGINE MECHANICAL>DRIVE BELT>INSTALLATION