Home › Engine / Hybrid System › 2TR-FE EMISSION CONTROL › AIR INJECTION DRIVER(w/ Secondary Air Injection System)
RM33J0E _51 Engine / Hybrid System _038457 2TR-FE EMISSION CONTROL _0189937 AIR INJECTION DRIVER(w/ Secondary Air Injection System) A

2TR-FE EMISSION CONTROL  AIR INJECTION DRIVER(w/ Secondary Air Injection System)  INSTALLATION  


PROCEDURE

Hide 89581B 1.INSTALL AIR INJECTION CONTROL DRIVER

a.

Install the air injection control driver to the air injection control bracket with the 2 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


Hide 89879B 2.INSTALL AIR INJECTION CONTROL DRIVER WITH BRACKET

a.

Install the air injection control driver with bracket with the 2 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


b.

Connect the body ground to the bracket with the bolt.

Torque:
8.3 N*m (85 kgf*cm, 73 in.*lbf)


c.

Attach the wire harness clamp.


d.

Connect the 2 air injection control driver connectors.