Home › Engine / Hybrid System › 2KD-FTV STARTING › RELAY
RM33J0E _51 Engine / Hybrid System _038453 2KD-FTV STARTING _0191961 RELAY G

2KD-FTV STARTING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 28300 1.INSPECT NO. 1 STARTER RELAY (ST NO. 1)

a.
A301376N01
2.333,0.792 2.635,0.51 false 2.052,1.75 2.344,1.438 false 1.656,1.115 2.01,1.115 false 2.656,1.115 3.01,1.115 false 0.281,1.313 0.438,1.51 0.156,0.198 10 1 1.271,1.323 1.427,1.521 0.156,0.198 10 2 0.302,0.771 0.458,0.969 0.156,0.198 10 3 1.271,0.781 1.427,0.979 0.156,0.198 10 5 2.677,0.427 2.833,0.625 0.156,0.198 10 1 1.938,1.708 2.094,1.906 0.156,0.198 10 2 1.51,1.031 1.667,1.229 0.156,0.198 10 3 3.063,1.031 3.219,1.229 0.156,0.198 10 5

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the No. 1 starter relay.


Hide 28610 2.INSPECT GLOW RELAY (GLOW)

a.
A301376N01
2.333,0.792 2.635,0.51 false 2.052,1.75 2.344,1.438 false 1.656,1.115 2.01,1.115 false 2.656,1.115 3.01,1.115 false 0.281,1.313 0.438,1.51 0.156,0.198 10 1 1.271,1.323 1.427,1.521 0.156,0.198 10 2 0.302,0.771 0.458,0.969 0.156,0.198 10 3 1.271,0.781 1.427,0.979 0.156,0.198 10 5 2.677,0.427 2.833,0.625 0.156,0.198 10 1 1.938,1.708 2.094,1.906 0.156,0.198 10 2 1.51,1.031 1.667,1.229 0.156,0.198 10 3 3.063,1.031 3.219,1.229 0.156,0.198 10 5

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the glow relay.