Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 2TR-FE)
RM33J0E _58 Vehicle Interior _038504 HEATING / AIR CONDITIONING _0192221 COMPRESSOR(for 2TR-FE) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 2TR-FE)  DISASSEMBLY  


PROCEDURE

Hide 88688N 1.REMOVE COOLER BRACKET

a.
E316310

Detach the clamp.


b.

Remove the screw and cooler bracket.


Hide 88410 2.REMOVE MAGNET CLUTCH ASSEMBLY

a.
E316312C01
1.115,0.844 1.146,0.271 1.146,0.271 1.344,0.271 false 1.385,0.198 1.698,0.354 0.313,0.156 10 false *a
*a SST


Clamp the compressor assembly with magnet clutch in a vise between aluminum plates.


b.

Using SST, hold the magnet clutch hub.

SST
09985-00270  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers that are used for adjusting clutch clearance.



d.
E316314

Using a snap ring expander, remove the snap ring and magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.
E316316

Using a snap ring expander, remove the snap ring and magnet clutch stator.