1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
12601E
2.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Intercooler)
16361A
3.REMOVE FAN AND GENERATOR V BELT
for 1KD-FTV:
Click hereEngine / Hybrid System>1KD-FTV ENGINE MECHANICAL>DRIVE BELT>REMOVAL
for 2KD-FTV:
Click hereEngine / Hybrid System>2KD-FTV ENGINE MECHANICAL>DRIVE BELT>REMOVAL
88711
4.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor assembly with magnet clutch.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
88704
5.DISCONNECT SUCTION HOSE SUB-ASSEMBLY
Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with magnet clutch.
Remove the O-ring from the suction hose sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
6.REMOVE COMPRESSOR ASSEMBLY WITH MAGNET CLUTCH
Disconnect the connector.
Detach the clamp.
Remove the 4 bolts compressor assembly with magnet clutch.