Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
If the front seat side airbag was deployed, replace the front seat airbag assembly, separate type front seatback frame sub-assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.
Replace any other damaged parts as necessary.
Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for LHD vehicles.
1.REMOVE FRONT SEAT ASSEMBLY RH (for Separate Seat Type)
2.REMOVE FRONT SEAT ASSEMBLY RH (for Bench Seat Type)
72525A
3.REMOVE RECLINING ADJUSTER RELEASE HANDLE RH (for Separate Seat Type)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY
71811D
4.REMOVE FRONT SEAT CUSHION SHIELD RH (for Separate Seat Type)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY
71861
5.REMOVE FRONT SEAT INNER CUSHION SHIELD RH (for Separate Seat Type)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY
73230
6.REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Separate Seat Type)
71013S
7.REMOVE FRONT SEATBACK FRAME SUB-ASSEMBLY RH (for Separate Seat Type)
Use the same procedure as for the driver seat.
for Hi-back Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY
for Low-back Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY
8.REMOVE SEAT CUSHION COVER WITH PAD (for Separate Seat Type)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY
71512S
9.REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR) (for Separate Seat Type)
Remove the 2 hog rings and disconnect the 2 straps of the separate type front seat cushion cover from the separate type front seat cushion pad.
Remove the 18 hog rings and separate type front seat cushion cover.
72525A
10.REMOVE RECLINING ADJUSTER RELEASE HANDLE RH (for Bench Seat Type)
71811D
11.REMOVE FRONT SEAT CUSHION SHIELD RH (for Bench Seat Type)
71861
12.REMOVE FRONT SEAT INNER CUSHION SHIELD RH (for Bench Seat Type)
13.REMOVE SEATBACK COVER WITH PAD (for Bench Seat Type)
14.REMOVE SEAT CUSHION COVER WITH PAD (for Bench Seat Type)
71512S
15.REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR) (for Bench Seat Type)
Remove the 7 hog rings and separate type front seat cushion pad.