Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY(for Double Cab)
RM33J0E _58 Vehicle Interior _040893 SEAT BELT _0192268 REAR SEAT INNER BELT ASSEMBLY(for Double Cab) G

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY(for Double Cab)  INSPECTION  


PROCEDURE

Hide 73390C 1.INSPECT REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

a.
B414243C01
1.604,1.208 1.073,1.5 true 2.135,1.25 2.708,1.51 true 0.135,0.104 0.448,0.26 0.313,0.156 10 false *a 0.708,1.469 1.323,1.667 0.615,0.198 10 false LBR- 2.792,1.479 3.406,1.677 0.615,0.198 10 false LBR+
*a Component without harness connected
(Rear No. 1 Seat Inner Belt Assembly LH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1(LBR-) - 2(LBR+) Seat belt unfastened Below 1 Ω
1(LBR-) - 2(LBR+) Seat belt fastened 10 MΩ or higher


If the result is not as specified, replace the rear No. 1 seat inner belt assembly LH.


Hide 73380C 2.INSPECT REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

a.
A104022C07
2,0.896 2.438,0.615 true 1.448,0.885 1.031,0.615 true 2.01,1.323 2.458,1.542 true 1.448,1.333 1,1.552 true 0.604,1.479 1.135,1.656 0.531,0.177 10 false CBR+ 2.563,1.521 2.979,1.688 0.417,0.167 10 false CBR- 0.125,0.073 0.333,0.25 0.208,0.177 10 false *a 0.635,0.542 1.083,0.698 0.448,0.156 10 false RBR+ 2.5,0.51 2.896,0.667 0.396,0.156 10 false RBR-
*a Component without harness connected
(Rear No. 1 Seat Inner Belt Assembly RH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1(RBR-) - 2(RBR+) Seat belt unfastened Below 1 Ω
1(RBR-) - 2(RBR+) Seat belt fastened 10 MΩ or higher
3(CBR-) - 4(CBR+) Center Seat belt unfastened Below 1 Ω
3(CBR-) - 4(CBR+) Center Seat belt fastened 10 MΩ or higher


If the result is not as specified, replace the rear No. 1 seat inner belt assembly RH.