Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY(for Double Cab)
RM33J0E _58 Vehicle Interior _040893 SEAT BELT _0192270 REAR CENTER SEAT OUTER BELT ASSEMBLY(for Double Cab) G

SEAT BELT  REAR CENTER SEAT OUTER BELT ASSEMBLY(for Double Cab)  INSPECTION  


PROCEDURE

Hide 73310D 1.INSPECT REAR CENTER SEAT 3 POINT TYPE BELT ASSEMBLY

a.
B404865C01
1.875,0.125 2.188,0.281 0.313,0.156 10 false *a 0.427,0.844 0.74,1 0.313,0.156 10 false *b 1.042,0.365 1.354,0.521 0.313,0.156 10 false *c
*a Unlock
*b Lock
*c 45°


Before installing the rear center seat 3 point type belt assembly, check the ELR function.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the result is not as specified, replace the rear center seat 3 point type belt assembly.