Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles
74210
1.REMOVE FRONT ARMREST ASSEMBLY RH
Use the same procedure as for the LH side.
Click hereVehicle Exterior>DOOR / HATCH>FRONT DOOR>DISASSEMBLY
2.REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL
84810
3.REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY
|
Protective Tape |
Using a screwdriver, detach the claw and remove the power window regulator switch assembly.
Tape the screwdriver tip before use.