Home › Engine / Hybrid System › 2TR-FE LUBRICATION › OIL PRESSURE SWITCH
RM33J0E _51 Engine / Hybrid System _038460 2TR-FE LUBRICATION _0193180 OIL PRESSURE SWITCH G

2TR-FE LUBRICATION  OIL PRESSURE SWITCH  INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:
·
A343690

To prevent injury due to contact with an operating fan and generator V-belt or cooling fan, keep your hands and clothing away from the fan and generator V-belt and cooling fans when working in the engine compartment with the engine running.

·
A343693

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.



PROCEDURE

Hide 83530 1.INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

CAUTION:
·

To prevent injury due to contact with an operating fan and generator V-belt or cooling fan, keep your hands and clothing away from the fan and generator V-belt and cooling fans when working in the engine compartment with the engine running.

·

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.



a.

Disconnect the engine oil pressure switch assembly connector.


b.

Start the engine.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - Body ground Engine stopped Below 1 Ω
Engine idling 10 kΩ or higher


If the result is not as specified, replace the engine oil pressure switch assembly.


d.

Connect the engine oil pressure switch assembly connector.