72020
1.INSPECT FRONT SEAT ADJUSTER ASSEMBLY LH (for LHD)
| *a | Component without wire harness connected
(Front Seat Adjuster Assembly LH (Front Power Seat Slide Position Motor LH)) |
Check the operation of the front power seat slide position motor LH.
Apply battery voltage to the front power seat slide position motor LH connector, and check that the front seat adjuster assembly LH operates smoothly as follows.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1 |
Forward |
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4 |
Backward |
If the result is not as specified, replace the front seat adjuster assembly LH.
| *a | Component without wire harness connected
(Front Seat Adjuster Assembly LH (Front Power Seat Tilt Position Motor LH)) |
Check the operation of the front power seat tilt position motor LH.
Apply battery voltage to the front power seat tilt position motor LH connector, and check that the front seat adjuster assembly LH operates smoothly as follows.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1 |
Upward |
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4 |
Downward |
If the result is not as specified, replace the front seat adjuster assembly LH.
| *a | Component without wire harness connected
(Front Seat Adjuster Assembly LH (Front Power Seat Lift Position Motor LH)) |
Check the operation of the front power seat lift position motor LH.
Apply battery voltage to the front power seat lift position motor LH connector, and check that the front seat adjuster assembly LH operates smoothly as follows.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1 |
Upward |
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2 |
Downward |
If the result is not as specified, replace the front seat adjuster assembly LH.
71014S
2.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY LH (for LHD)
| *a | Component without wire harness connected
(Front Seatback Frame Sub-assembly LH (Front Power Seat Reclining Position Motor LH)) |
Check the operation of the front power seat reclining position motor LH.
Apply battery voltage to the front power seat reclining position motor LH connector, and check that the front seatback frame sub-assembly LH operates smoothly as follows.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1 |
Forward |
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4 |
Backward |
If the result is not as specified, replace the front seat seatback frame sub-assembly LH.
72010
3.INSPECT FRONT SEAT ADJUSTER ASSEMBLY RH (for RHD)
| *a | Component without wire harness connected
(Front Seat Adjuster Assembly RH (Front Power Seat Slide Position Motor RH)) |
Check the operation of the front power seat slide position motor RH.
Apply battery voltage to the front power seat slide position motor RH connector, and check that the front seat adjuster assembly RH operates smoothly as follows.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1 |
Forward |
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4 |
Backward |
If the result is not as specified, replace the front seat adjuster assembly RH.
| *a | Component without wire harness connected
(Front Seat Adjuster Assembly RH (Front Power Seat Tilt Position Motor RH)) |
Check the operation of the front power seat tilt position motor RH.
Apply battery voltage to the front power seat tilt position motor RH connector, and check that the front seat adjuster assembly RH operates smoothly as follows.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1 |
Upward |
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4 |
Downward |
If the result is not as specified, replace the front seat adjuster assembly RH.
| *a | Component without wire harness connected
(Front Seat Adjuster Assembly RH (Front Power Seat Lift Position Motor RH)) |
Check the operation of the front power seat lift position motor RH.
Apply battery voltage to the front power seat lift position motor RH connector, and check that the front seat adjuster assembly RH operates smoothly as follows.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1 |
Upward |
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2 |
Downward |
If the result is not as specified, replace the front seat adjuster assembly RH.
71013S
4.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY RH (for RHD)
| *a | Component without wire harness connected
(Front Seatback Frame Sub-assembly RH (Front Power Seat Reclining Position Motor RH)) |
Check the operation of the front power seat reclining position motor RH.
Apply battery voltage to the front power seat reclining position motor RH connector, and check that the front seatback frame sub-assembly RH operates smoothly as follows.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1 |
Forward |
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4 |
Backward |
If the result is not as specified, replace the front seat seatback frame sub-assembly RH.