Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Bench Seat Type)
RM33J0E _58 Vehicle Interior _038502 SEAT _0193320 FRONT SEAT ASSEMBLY(for Bench Seat Type) A

SEAT  FRONT SEAT ASSEMBLY(for Bench Seat Type)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·
B394717

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.

·

If the front seat side airbag was deployed, replace the front seat airbag assembly, separate type front seatback frame sub-assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.

·

Replace any other damaged parts as necessary.



PROCEDURE

Hide 1.INSTALL FRONT SEAT ASSEMBLY

a.
B413259

Place the front seat assembly in the vehicle, as shown in the illustration.

NOTICE:

Do not damage the front seat assembly, body exterior or interior parts.



b.

Temporarily install the 4 bolts.


c.
B402746C03
2.688,0.5 2.896,0.719 0.208,0.219 10 true (1) 1.552,0.938 1.76,1.156 0.208,0.219 10 true (2) 0.135,2.448 0.344,2.667 0.208,0.219 10 true (3) 0.927,3.063 1.135,3.281 0.208,0.219 10 true (4)
V100135

Bolt
V100136

Connector


Install the 4 bolts in the order shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


d.

Connect the connector.


Hide 72138H 2.INSTALL FRONT SEAT REAR INNER TRACK COVER LH

a.
B416258

Attach the hook to install the front seat rear inner track cover LH.


Hide 72138J 3.INSTALL FRONT SEAT REAR OUTER TRACK COVER LH

a.
B416259

Attach the hook to install the front seat rear outer track cover LH.