Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
58904B
1.INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY
Attach the guide to install the parking brake hole cover sub-assembly.
58901A
2.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY
|
Install in this Direction |
Attach the guide and clip to install the rear console box sub-assembly as shown in the illustration.
After installing the rear console box sub-assembly, check that the parking brake hole cover sub-assembly is securely installed.
Install the 2 screws.
58815A
3.INSTALL CONSOLE BOX CARPET
Install the console box carpet.