Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING(for Single Cab)
RM33J0E _58 Vehicle Interior _038506 INTERIOR PANELS / TRIM _0193464 ROOF HEADLINING(for Single Cab) A

INTERIOR PANELS / TRIM  ROOF HEADLINING(for Single Cab)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 82171 1.INSTALL NO. 1 ROOF WIRE

a.

w/ Overhead Console:

i.
B404497C02
1.427,0.646 2.729,0.823 true 1.26,0.521 1.573,0.677 0.313,0.156 10 false *a
*a Marking
V100155

Tape


Fix the No. 1 roof wire in place with tape as shown in the illustration.

HINT:

Align the tape with the markings when attaching it.




b.

w/o Overhead Console:

i.
B414213C02
1.042,0.99 2.656,1.188 true 0.844,0.865 1.156,1.021 0.313,0.156 10 false *a
*a Marking
V100155

Tape


Fix the No. 1 roof wire in place with tape as shown in the illustration.

HINT:

Align the tape with the markings when attaching it.




Hide 63342 2.INSTALL NO. 2 ROOF SILENCER PAD

a.

w/ Overhead Console:

i.
B404496C01
0.844,1.396 2.198,1.646 true 0.656,1.292 0.896,1.448 0.24,0.156 10 false *a
*a Silencer Marking


Align the No. 2 roof silencer pad with the silencer markings on the roof headlining and install the No. 2 roof silencer pad using double-sided tape or adhesive as shown in the illustration.



b.

w/o Overhead Console:

i.
B414212C01
0.781,1.323 2.042,1.625 true 0.583,1.188 0.896,1.344 0.313,0.156 10 false *a
*a Silencer Marking


Align the No. 2 roof silencer pad with the silencer markings on the roof headlining and install the No. 2 roof silencer pad using double-sided tape or adhesive as shown in the illustration.



Hide 63341 3.INSTALL NO. 1 ROOF SILENCER PAD

a.

w/ Overhead Console:

i.
B404495C01
0.75,1.063 1.625,1.271 true 0.573,0.938 0.885,1.094 0.313,0.156 10 false *a
*a Silencer Marking


Align the 2 No. 1 roof silencer pads with the silencer markings on the roof headlining and install the 2 No. 1 roof silencer pads using double-sided tape or adhesive as shown in the illustration.



b.

w/o Overhead Console:

i.
B414211C01
0.688,0.917 1.563,1.177 true 0.5,0.781 0.813,0.938 0.313,0.156 10 false *a
*a Silencer Marking


Align the 2 No. 1 roof silencer pads with the silencer markings on the roof headlining and install the 2 No. 1 roof silencer pads using double-sided tape or adhesive as shown in the illustration.