75777E
1.REMOVE FRONT HOOD MOULDING PAD
75770
2.REMOVE FRONT HOOD MOULDING ASSEMBLY
53381
3.REMOVE HOOD TO RADIATOR SUPPORT SEAL
Using a clip remover, remove the 6 clips and hood to radiator support seal.
53341B
4.REMOVE HOOD INSULATOR
w/ Hood Bulge:
Using a clip remover, remove the 10 clips.
Detach the guide and remove the hood insulator.
w/ Hood Insulator:
Using a clip remover, remove the 12 clips.
Detach the guide and remove the hood insulator.
76186
5.REMOVE HOOD AIR INTAKE SEAL (w/ Hood Bulge)
Detach the clip and remove the hood air intake seal.
76181
6.REMOVE HOOD BULGE (w/ Hood Bulge)
Remove the 11 nuts.
Detach the clip and remove the hood bulge.
76183
7.REMOVE NO. 1 HOOD BULGE PROTECTOR (w/ Hood Bulge)
Remove the No. 1 hood bulge protector from the hood bulge.
Remove any remaining double-sided tape from the hood bulge.
85035
8.REMOVE WASHER NOZZLE SUB-ASSEMBLY
9.DISCONNECT WASHER HOSE
Detach the clamp and disconnect the washer hose.