Home › Vehicle Exterior › DOOR / HATCH › FRONT DOOR OPENING TRIM WEATHERSTRIP(for Smart Cab)
RM33J0E _59 Vehicle Exterior _038495 DOOR / HATCH _0193478 FRONT DOOR OPENING TRIM WEATHERSTRIP(for Smart Cab) A

DOOR / HATCH  FRONT DOOR OPENING TRIM WEATHERSTRIP(for Smart Cab)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 62312B 1.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

a.
B412129C01
0.531,0.427 0.531,0.229 0.531,0.229 0.438,0.229 true 2.906,0.417 2.906,0.219 2.906,0.219 2.958,0.219 true 1.073,2.573 1.292,2.573 1.292,2.573 1.573,2.813 false 0.25,0.125 0.469,0.344 0.219,0.219 10 true *b 2.99,0.125 3.208,0.344 0.219,0.219 10 true *b 0.854,2.479 1.167,2.677 0.313,0.198 10 false *a
*a Paint Mark
*b Mark Position


Align the paint mark on the front door opening trim weatherstrip LH with the 2 mark positions on the vehicle and install the front door opening trim weatherstrip LH.

NOTICE:
·

Always align the paint mark when installing the part. If the paint mark position is out of place, water leaks may occur.

·

After the installation, check that the corners are properly installed.



HINT:

To easily install the weatherstrip, first install the area with the paint mark as shown in the illustration. Then install the part toward the corners and push any excess length into the corners.



Hide 62432C 2.INSTALL FRONT ROOF SIDE RAIL GARNISH LH

Hide 62112 3.INSTALL COWL SIDE TRIM BOARD LH