85330
1.INSTALL WINDSHIELD WASHER JAR ASSEMBLY
Install the windshield washer jar assembly with the 3 bolts in the order indicated in the illustration.
Attach the clamp.
85301
2.INSTALL WASHER INLET SUB-ASSEMBLY
|
Install in this Direction |
Install the washer inlet sub-assembly to the windshield washer jar assembly.
Attach the claw and guide.
85310
3.INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
|
Install in this Direction |
Install the windshield washer motor and pump assembly.
Connect the connector.
Connect the washer hose.
for 2WD Model:
|
Clip |
|
Screw |
|
Return in this Direction |
Return the front fender liner LH to its original position as shown in the illustration.
Install the 9 clips.
Install the 3 screws.
for 4WD Model, for Prerunner Model:
|
Clip |
|
Screw |
|
Return in this Direction |
Return the front fender liner LH to its original position as shown in the illustration.
Install the 11 clips.
Install the 3 screws.
| *a | Correct |
| *b | Incorrect |
Install the pin hold clip as shown in the illustration.
4.FILL UP WINDSHIELD WASHER JAR WITH WASHER FLUID
Refill the windshield washer fluid.