Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)
RM33J0E _58 Vehicle Interior _038504 HEATING / AIR CONDITIONING _0193639 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) D

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  INITIALIZATION  


INITIALIZATION SERVO MOTOR


a.

Turn the engine switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the engine switch on (IG).


d.

Press the "A/C OFF" switch.


e.

Turn the GTS on.


f.

Enter the following menus: Body Electrical / Air Conditioner / Utility / Servomotor Initialization.


g.

According to the GTS display, perform servo motor initialization.

Body Electrical > Air Conditioner > Utility
Tester Display
Servomotor Initialization
50005 121 174
HINT:

During initialization, the A/C AUTO indicator light comes on, and then goes off when initialization has finished.



h.

According to the GTS display, select the "Exit" switch to finish initialization.