Home › Engine / Hybrid System › 2TR-FE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE
RM33J0E _51 Engine / Hybrid System _038454 2TR-FE ENGINE CONTROL _0193660 CAMSHAFT OIL CONTROL VALVE G

2TR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSPECTION  


PROCEDURE

Hide 11101J 1.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 6.9 to 7.9 Ω


If the result is not as specified, replace the camshaft timing oil control valve assembly.


b.
A341582C01
0.75,1.448 1,0.917 1,0.917 1.167,0.917 true 2.583,0.115 2.896,0.271 0.313,0.156 10 false *a 0.313,1.76 0.625,1.917 0.313,0.156 10 false *b 1.021,1.771 1.333,1.927 0.313,0.156 10 false *c 1.188,0.833 1.5,0.99 0.313,0.156 10 false *d
*a Component without harness connected
(Camshaft Timing Oil Control Valve Assembly)
*b When voltage is applied (advanced side)
*c When voltage is not applied (retarded side)
*d Spool Valve


Check the operation.

i.

Apply battery voltage between the terminals and check that the spool valve operates.

HINT:

Problems in the spool valve returning caused by sticking of sludge or foreign objects sometimes cause slight pressure leaks to the advanced side and result in detection of DTCs.

If the spool valve is struck, replace the camshaft timing oil control valve assembly.