Home › Engine / Hybrid System › 1GD-FTV STARTING › RELAY
RM33J0E _51 Engine / Hybrid System _038427 1GD-FTV STARTING _0193850 RELAY G

1GD-FTV STARTING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 28300 1.INSPECT STARTER RELAY ASSEMBLY (ST NO. 1)

a.
A301376N01
2.333,0.792 2.635,0.51 false 2.052,1.75 2.344,1.438 false 1.656,1.115 2.01,1.115 false 2.656,1.115 3.01,1.115 false 0.281,1.313 0.438,1.51 0.156,0.198 10 1 1.271,1.323 1.427,1.521 0.156,0.198 10 2 0.302,0.771 0.458,0.969 0.156,0.198 10 3 1.271,0.781 1.427,0.979 0.156,0.198 10 5 2.677,0.427 2.833,0.625 0.156,0.198 10 1 1.938,1.708 2.094,1.906 0.156,0.198 10 2 1.51,1.031 1.667,1.229 0.156,0.198 10 3 3.063,1.031 3.219,1.229 0.156,0.198 10 5

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the starter relay.


Hide 28610 2.INSPECT GLOW RELAY (GLOW)

a.
A301376N01
2.333,0.792 2.635,0.51 false 2.052,1.75 2.344,1.438 false 1.656,1.115 2.01,1.115 false 2.656,1.115 3.01,1.115 false 0.281,1.313 0.438,1.51 0.156,0.198 10 1 1.271,1.323 1.427,1.521 0.156,0.198 10 2 0.302,0.771 0.458,0.969 0.156,0.198 10 3 1.271,0.781 1.427,0.979 0.156,0.198 10 5 2.677,0.427 2.833,0.625 0.156,0.198 10 1 1.938,1.708 2.094,1.906 0.156,0.198 10 2 1.51,1.031 1.667,1.229 0.156,0.198 10 3 3.063,1.031 3.219,1.229 0.156,0.198 10 5

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the glow relay.