Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
33504F
1.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
58804A
2.REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
58903A
3.REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY
58810J
4.REMOVE CONSOLE BOX ASSEMBLY
899A0A
5.REMOVE NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY
Do not reuse dropped or damaged parts.
Disconnect the connector.
Detach the clamp and remove the No. 2 indoor electrical key antenna assembly.