Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENTRY LOCK AND UNLOCK SWITCH
RM33J0E _58 Vehicle Interior _038496 THEFT DETERRENT / KEYLESS ENTRY _0193917 ENTRY LOCK AND UNLOCK SWITCH A

THEFT DETERRENT / KEYLESS ENTRY  ENTRY LOCK AND UNLOCK SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 69220 1.INSTALL FRONT DOOR OUTSIDE HANDLE ASSEMBLY LH

a.

Apply MP grease to the sliding area of the front door outside handle assembly LH.


b.
E320260C01
0,0 0,0 false
V113147

Install in this Direction


Install the front door outside handle assembly LH by moving it in the direction indicated by the arrow shown in the illustration.


c.
E320261

Attach the claw of the connector to connect the connector.


d.
E320262C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claws of the connector cover to connect the connector cover.


Hide 69217D 2.INSTALL FRONT DOOR OUTSIDE HANDLE COVER

a.

Apply MP grease to the sliding parts of the lock cylinder.


b.

Install the front door outside handle cover with lock cylinder.


c.
E322712C01
2.625,1.646 2.385,1.646 false 2.24,1.583 2.552,1.781 0.313,0.198 10 false *1
*1 Hole Plug
V113147

Install in this Direction


Using a T30 "TORX" socket wrench, tighten the screw.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


d.

Install the hole plug.


Hide 67832 3.INSTALL FRONT DOOR SERVICE HOLE COVER LH

Hide 67602 4.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

Hide 74220 5.INSTALL FRONT ARMREST ASSEMBLY LH

Hide 6.INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL

Hide 69284C 7.INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

Hide 67492A 8.INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH