Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH
RM33J0E _58 Vehicle Interior _038496 THEFT DETERRENT / KEYLESS ENTRY _0193918 ENGINE HOOD COURTESY SWITCH A

THEFT DETERRENT / KEYLESS ENTRY  ENGINE HOOD COURTESY SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 53510 1.INSTALL HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)

a.
E320268

Apply MP grease to the sliding areas of the lock.


b.
E320266

Attach the guide and connect the hood lock control cable.


c.
E320269C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Move the hood lock assembly (engine hood courtesy switch) in the direction of the arrow shown in the illustration.


d.
E320264C04
0.677,1.146 0.906,1.333 0.229,0.188 10 true (2) 2.156,1.396 2.365,1.604 0.208,0.208 10 true (1) 0.906,1.542 1.094,1.75 0.188,0.208 10 true (3)
V100135

Bolt
V100136

Connector


Install the hood lock assembly (engine hood courtesy switch) with the 3 bolts.

Torque:
11 N*m (112 kgf*cm, 8 ft.*lbf)

HINT:

Tighten the bolts in the order shown in the illustration.



e.

Connect the connector.


Hide 53117C 2.INSTALL NO. 1 RADIATOR GRILLE RETAINER

Hide 53301 3.ADJUST HOOD SUB-ASSEMBLY