51410
1.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY (for 4WD and Pre-Runner)
51442
2.REMOVE NO. 2 ENGINE UNDER COVER (for 4WD and Pre-Runner)
3.REMOVE FRONT WHEEL LH
4.DRAIN POWER STEERING FLUID
53737B
5.REMOVE FRONT FENDER APRON SEAL LH
Detach the 6 clips and remove the front fender apron seal LH.
44348A
6.DISCONNECT NO. 1 OIL RESERVOIR TO PUMP HOSE
Slide the clip and disconnect the No. 1 oil reservoir to pump hose.
44410
7.DISCONNECT PRESSURE FEED TUBE ASSEMBLY
Using a union nut wrench, disconnect the pressure feed tube from the vane pump assembly.
44320
8.REMOVE VANE PUMP ASSEMBLY
Remove the 2 nuts and vane pump assembly.
Remove the O-ring.