Home › Drivetrain › CLUTCH › CLUTCH RELEASE CYLINDER
RM33J0E _52 Drivetrain _038465 CLUTCH _0193974 CLUTCH RELEASE CYLINDER A

CLUTCH  CLUTCH RELEASE CYLINDER  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL RELEASE CYLINDER BLEEDER PLUG

a.

Install the release bleeder plug to the cylinder body.

Torque:
11.8 N*m (120 kgf*cm, 9 ft.*lbf)


b.

Install the bleeder plug cap to the bleeder plug.


Hide 2.INSTALL CLUTCH RELEASE CYLINDER KIT

a.

Install 2 new cylinder cups to a new piston.


b.
CL00672C10
3.25,2.083 3.333,2.083 false
V100135

Lithium soap base glycol grease


Apply lithium soap base glycol grease to the portions indicated by the arrows in the illustration.


c.

Install a new spring to the piston.


d.

Install the release cylinder piston together with the spring to the cylinder body.

NOTICE:

Do not damage the inside of the cylinder body.



e.

Install the No. 1 clutch release cylinder push rod to the clutch cylinder boot.


f.

Install the clutch release cylinder boot together with the No. 1 clutch release cylinder push rod to the release cylinder body.