Home › Drivetrain › CLUTCH › CLUTCH ACCUMULATOR
RM33J0E _52 Drivetrain _038465 CLUTCH _0193975 CLUTCH ACCUMULATOR A

CLUTCH  CLUTCH ACCUMULATOR  INSTALLATION  


PROCEDURE

Hide 31490 1.INSTALL CLUTCH ACCUMULATOR ASSEMBLY

a.

Install the clutch accumulator assembly with the 2 nuts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


b.
C323278C01
1.625,1.938 1.938,2.135 0.313,0.198 10 false *a
*a Torque Wrench Fulcrum Length


Using a union nut wrench, connect the master cylinder to flexible hose tube and accumulator to flexible hose tube.

Torque:
Specified tightening torque : 15.2 N*m (155 kgf*cm, 11 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)




Hide 2.BLEED AIR FROM CLUTCH PIPE LINE

Hide 3.CHECK FOR CLUTCH FLUID LEAKAGE

HINT:

Check for leaks in the clutch system.


Hide 4.CHECK FLUID LEVEL IN RESERVOIR