Home › Drivetrain › CLUTCH › CLUTCH UNIT(for R151)
RM33J0E _52 Drivetrain _038465 CLUTCH _0193976 CLUTCH UNIT(for R151) A

CLUTCH  CLUTCH UNIT(for R151)  REMOVAL  


PROCEDURE

Hide 31126 2.REMOVE CLUTCH RELEASE FORK BOOT

Hide 31230 3.REMOVE CLUTCH RELEASE BEARING ASSEMBLY

a.

Remove the clutch release bearing assembly together with the clutch release fork sub-assembly from the clutch housing.


b.

for TR Engine

i.

Remove the clutch release fork sub-assembly from the clutch release bearing assembly.



c.

for KD Engine

i.

Remove the clutch release fork sub-assembly from the clutch release bearing assembly.

NOTICE:

If the clutch release fork collar comes off from the clutch release fork sub-assembly, replace the clutch release fork collar and clutch release fork dust seal with new ones.




d.

Remove the release bearing hub clip from the clutch release bearing assembly.


Hide 31236B 4.REMOVE RELEASE FORK SUPPORT

a.

Remove the release fork support from the manual transmission unit.


Hide 31210 5.REMOVE CLUTCH COVER ASSEMBLY

a.
C322145C01
1.208,1.469 1.031,1.938 1.031,1.938 1.104,1.531 true 0.938,1.927 1.25,2.125 0.313,0.198 10 false *a
*a Matchmark


Place matchmarks on the clutch cover assembly and flywheel.


b.

Loosen each set bolt one turn at a time until spring tension is released.


c.

Remove the 6 set bolts and pull off the clutch cover assembly.

NOTICE:

Do not drop the clutch disc assembly.



Hide 31250 6.REMOVE CLUTCH DISC ASSEMBLY

NOTICE:

Keep the lining part of the clutch disc, the pressure plate and the surface of the flywheel away from oil and foreign matter.


Hide 31237 7.REMOVE CLUTCH RELEASE FORK SUPPORT BOOT (for TR Engine)

a.

Remove the release fork support spring from the clutch release fork sub-assembly.


b.

Remove the clutch release fork support boot from the clutch release fork sub-assembly.


Hide 31241 8.REMOVE CLUTCH RELEASE FORK DUST SEAL (for KD Engine)

a.

Remove the clutch release fork collar from the clutch release fork sub-assembly.


b.

Remove the clutch release fork dust seal from the clutch release fork sub-assembly.