Home › Drivetrain › CLUTCH › CLUTCH PEDAL SWITCH
RM33J0E _52 Drivetrain _038465 CLUTCH _0193978 CLUTCH PEDAL SWITCH G

CLUTCH  CLUTCH PEDAL SWITCH  INSPECTION  


PROCEDURE

Hide 84520 1.INSPECT CLUTCH START SWITCH ASSEMBLY

a.
C323280C01
0.552,2.271 0.865,2.469 0.313,0.198 10 false *a
*a 7.65 to 8.35 mm (0.302 to 0.328 in.)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Pushed (On) Below 1 Ω
1 - 2 Not pushed (Off) 10 kΩ or higher


If the result is not as specified, replace the clutch start switch assembly.


Hide 88280A 2.INSPECT CLUTCH SWITCH ASSEMBLY

a.
B184278C04
1.01,2.438 1.385,2.708 0.375,0.271 10 false *a
*a 6.5 to 7.5 mm (0.256 to 0.295 in.)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Pushed (On) Below 1 Ω
1 - 2 Not pushed (Off) 10 kΩ or higher


If the result is not as specified, replace the clutch switch assembly.