Home › Brake › BRAKE (FRONT) › FRONT BRAKE(for 16 inch Front Disc Brake 2WD)
RM33J0E _54 Brake _038479 BRAKE (FRONT) _0193992 FRONT BRAKE(for 16 inch Front Disc Brake 2WD) A

BRAKE (FRONT)  FRONT BRAKE(for 16 inch Front Disc Brake 2WD)  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE CYLINDER BOOT

a.
C321898C01
2.063,1.156 2.5,1.781 2.5,1.781 2.698,1.781 true 2.76,1.688 2.958,1.885 0.198,0.198 10 false *a
*a Protective Tape


Using a screwdriver, remove the cylinder boot from the disc brake cylinder assembly LH.

HINT:

Tape the screwdriver tip before use.


NOTICE:

Be careful not to damage the front disc brake piston and disc brake cylinder assembly LH.



Hide 47731 2.REMOVE FRONT DISC BRAKE PISTON

a.
C321878C01
0.948,1.427 0.948,1.771 false 0.885,1.802 1.063,1.979 0.177,0.177 10 false *a
*a Cloth


Place a piece of cloth between the front disc brake piston and disc brake cylinder assembly LH.


b.

Apply compressed air to remove the front disc brake piston from the disc brake cylinder assembly LH.

CAUTION:

Do not place your fingers in front of the piston when using compressed air.


NOTICE:

Be careful not to spatter the brake fluid.



Hide 3.REMOVE PISTON SEAL

a.
C321899C01
1.76,1.156 2.323,1.802 2.323,1.802 2.552,1.802 true 2.594,1.719 2.781,1.917 0.188,0.198 10 false *a
*a Protective Tape


Using a screwdriver, remove the piston seal from the disc brake cylinder assembly LH.

HINT:

Tape the screwdriver tip before use.


NOTICE:

Be careful not to damage the inner cylinder and cylinder groove.



Hide 31478B 4.REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

Hide 47547B 5.REMOVE FRONT DISC BRAKE BLEEDER PLUG

a.

Remove the bleeder plug from the disc brake cylinder assembly LH.