Home › Brake › BRAKE (FRONT) › FRONT BRAKE FLEXIBLE HOSE(for 2WD)
RM33J0E _54 Brake _038479 BRAKE (FRONT) _0193996 FRONT BRAKE FLEXIBLE HOSE(for 2WD) A

BRAKE (FRONT)  FRONT BRAKE FLEXIBLE HOSE(for 2WD)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

Wash off brake fluid immediately if it comes in contact with any painted surface.


Hide 47313A 3.REMOVE FRONT FLEXIBLE HOSE

a.
C323352

Remove the union bolt and gasket and disconnect the front flexible hose.


b.

Using a union nut wrench, disconnect the brake line while holding the front flexible hose with a wrench.

NOTICE:
·

Do not kink or damage the brake line.

·

Do not allow any foreign matter such as dirt or dust to enter the brake line.




c.

Remove the clip.


d.

Remove the bolt and front flexible hose from the absorber bracket.