Home › Brake › BRAKE (REAR) › REAR BRAKE FLEXIBLE HOSE(for 4WD and Pre-Runner)
RM33J0E _54 Brake _038480 BRAKE (REAR) _0194001 REAR BRAKE FLEXIBLE HOSE(for 4WD and Pre-Runner) A

BRAKE (REAR)  REAR BRAKE FLEXIBLE HOSE(for 4WD and Pre-Runner)  INSTALLATION  


PROCEDURE

Hide 47355A 1.INSTALL NO. 5 FLEXIBLE HOSE BRACKET

a.

Connect the No. 5 flexible hose bracket with the 2 bolts.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


b.

Install the No. 5 flexible hose bracket with the 3 bolts.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)


c.

Attach the brake tube clamp to the No. 5 flexible hose bracket.


Hide 47356 2.INSTALL NO. 6 FLEXIBLE HOSE BRACKET

a.

Install the No. 6 flexible hose bracket with the bolt.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)


Hide 47321B 3.INSTALL REAR BRAKE TUBE FLEXIBLE HOSE

a.

Connect the flexible hose to the connecting point with each brake tube, and then install 2 new clips.


b.
A329093C03
1.719,0.542 2.031,0.698 0.313,0.156 10 false *a
*a Torque Wrench Fulcrum Length


Using a union nut wrench, connect the rear brake tube flexible hose to the brake tube while holding the rear brake tube flexible hose with a wrench.

Torque:
Specified tightening torque : 15.2 N*m (155 kgf*cm, 11 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)



NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.




c.

Connect the flexible hose to the connecting point with each brake tube, and then install 2 new clips.


d.
A329093C03
1.719,0.542 2.031,0.698 0.313,0.156 10 false *a
*a Torque Wrench Fulcrum Length


Using a union nut wrench, connect each brake tube to the flexible hose while holding the flexible hose with a wrench.

Torque:
Specified tightening torque : 15.2 N*m (155 kgf*cm, 11 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)



NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.




Hide 4.BLEED BRAKE LINE (w/ VSC)

Hide 5.BLEED BRAKE LINE (w/o VSC)

Hide 6.BLEED CLUTCH LINE (for Manual Transmission)