Home › Drivetrain › A750F AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSMISSION SYSTEM
RM33J0E _52 Drivetrain _038463 A750F AUTOMATIC TRANSMISSION / TRANSAXLE _0194109 AUTOMATIC TRANSMISSION SYSTEM U

A750F AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM  TERMINALS OF ECU  


HINT:

The standard voltage at each TCM terminal is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration below as a reference for the ECU terminals.


TCM


C214981E11
1.479,0.208 1.854,0.427 0.375,0.219 3.49,0.208 3.865,0.427 0.375,0.219 5.458,0.208 5.833,0.427 0.375,0.219 1.542,0.25 1.854,0.427 0.313,0.177 10 false C77 3.552,0.25 3.865,0.427 0.313,0.177 10 false G89 5.51,0.25 5.823,0.427 0.313,0.177 10 false G90

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G90-5 (BATT) - C77-1 (E1) W - W-B Battery (for measuring battery voltage and for TCM memory) Always 11 to 14 V
C77-12 (NSW) - C77-1 (E1) L - W-B PNP switch signal
·

Ignition switch ON

·

Shift lever in P or N


Below 1 V
·

Ignition switch ON

·

Shift lever not in P or N


11 to 14 V
C77-11 (STA) - C77-1 (E1) G - W-B Starter signal Cranking 6 V or higher
C77-13 (P) - C77-1 (E1) LG - W-B P shift position switch signal
·

Ignition switch ON

·

Shift lever in P


11 to 14 V
·

Ignition switch ON

·

Shift lever not in P


Below 1 V
G89-9 (R) - C77-1 (E1) R - W-B R shift position switch signal
·

Ignition switch ON

·

Shift lever in R


11 to 14 V
·

Ignition switch ON

·

Shift lever not in R


Below 1 V
C77-14 (N) - C77-1 (E1) G - W-B N shift position switch signal
·

Ignition switch ON

·

Shift lever in N


11 to 14 V
·

Ignition switch ON

·

Shift lever not in N


Below 1 V
G89-8 (D) - C77-1 (E1) P - W-B D shift position switch signal
·

Ignition switch ON

·

Shift lever in D


11 to 14 V
·

Ignition switch ON

·

Shift lever not in D


Below 1 V
G90-15 (S) - C77-1 (E1) L - W-B S shift position switch signal
·

Ignition switch ON

·

Shift lever in S, "+" or "-"


11 to 14 V
·

Ignition switch ON

·

Shift lever not in S, "+" or "-"


Below 1 V
G90-22 (SFTU) - C77-1 (E1) W - W-B Up-shift position switch signal
·

Ignition switch ON

·

Shift lever in S


11 to 14 V
·

Ignition switch ON

·

Shift lever in "+" (Up-shift)


Below 1 V
G90-23 (SFTD) - C77-1 (E1) G - W-B Down-shift position switch signal
·

Ignition switch ON

·

Shift lever in S


11 to 14 V
·

Ignition switch ON

·

Shift lever in "-" (Down-shift)


Below 1 V
C77-18 (S1) - C77-1 (E1) L - W-B S1 solenoid signal Ignition switch ON 11 to 14 V
1st or 2nd gear 11 to 14 V
3rd, 4th or 5th gear Below 1 V
C77-17 (S2) - C77-1 (E1) G - W-B S2 solenoid signal Ignition switch ON Below 1 V
2nd or 3rd gear 11 to 14 V
1st, 4th or 5th gear Below 1 V
C77-16 (SR) - C77-1 (E1) SB - W-B SR solenoid signal Ignition switch ON Below 1 V
5th gear 11 to 14 V
1st gear Below 1 V
C77-9 (SL1+) - C77-8 (SL1-) GR - V SL1 solenoid signal Engine idling Pulse generation
C77-7 (SL2+) - C77-6 (SL2-) W - R SL2 solenoid signal Engine idling Pulse generation
C77-20 (SLT+) - C77-19 (SLT-) LG - P SLT solenoid signal Engine idling Pulse generation
C77-22 (SLU+) - C77-21 (SLU-) B - Y SLU solenoid signal 4th gear (lock-up) or 5th gear (lock-up) Pulse generation
C77-25 (THO1) - C77-23 (E2) L - G No. 1 ATF temperature sensor signal No. 1 ATF temperature: 115°C (239°F) or higher Below 1.5 V
C77-24 (THO2) - C77-23 (E2) SB - G No. 2 ATF temperature sensor signal No. 2 ATF temperature: 115°C (239°F) or higher Below 1.5 V
G90-14 (STP) - C77-1 (E1) SB - W-B Stop light switch signal Brake pedal is depressed 7.5 to 14 V
Brake pedal is released Below 1.5 V
C77-3 (NT+) - C77-2 (NT-) W - B Transmission revolution sensor (NT) signal Engine idling (shift lever in P or N) Pulse generation
(See waveform 1)
C77-30 (SP2+) - C77-29 (SP2-) P - L Transmission revolution sensor (SP2) signal Vehicle speed 20 km/h (12 mph) Pulse generation
(See waveform 2)
G89-15 (L4) - C77-1 (E1) Y - W-B L4 position signal
·

Ignition switch ON

·

Transfer in L4


11 to 14 V
·

Ignition switch ON

·

Transfer not in L4


Below 1.5 V
G90-6 (IG2) - C77-1 (E1) P - W-B Ignition switch Ignition switch ON 11 to 14 V
G90-25 (SPD1) - C77-1 (E1) V - W-B Vehicle speed signal Vehicle speed 20 km/h (12 mph) Pulse generation
(See waveform 3)
G90-21 (CAN+) - C77-1 (E1) G - W-B CAN communication line Ignition switch ON Pulse generation
(See waveform 4)
G90-20 (CAN-) - C77-1 (E1) V - W-B CAN communication line Ignition switch ON Pulse generation
(See waveform 5)

a.
C162170E01
2.708,0.177 3.292,0.375 0.583,0.198 10 false 1 V/DIV. 2.99,0.958 3.344,1.156 0.354,0.198 10 false GND 1.667,1.76 2.479,1.958 0.813,0.198 10 false 2 msec./DIV.

Using an oscilloscope, check waveform 1.

Reference
Terminal No. (Symbol) Tool Setting Condition
C77-3 (NT+) - C77-2 (NT-) 1 V/DIV., 2 msec./DIV. Engine idling (shift lever in P or N)


b.
C161208E01
2.708,0.198 3.292,0.396 0.583,0.198 10 false 2 V/DIV. 3,0.969 3.354,1.167 0.354,0.198 10 false GND 1.583,1.76 2.479,1.958 0.896,0.198 10 false 20 msec./DIV.

Using an oscilloscope, check waveform 2.

Reference
Terminal No. (Symbol) Tool Setting Condition
C77-30 (SP2+) - C77-29 (SP2-) 2 V/DIV., 20 msec./DIV. Vehicle speed 20 km/h (12 mph)


c.
C216837E02
2.481,0.252 3.137,0.453 0.656,0.201 10 2 V/DIV. 2.623,1.176 3.035,1.378 0.412,0.203 10 GND 1.347,1.691 2.304,1.879 0.956,0.188 10 20 msec./DIV.

Using an oscilloscope, check waveform 3.

Reference
Terminal No. (Symbol) Tool Setting Condition
G90-25 (SPD1) - C77-1 (E1) 2 V/DIV., 20 msec./DIV. Vehicle speed 20 km/h (12 mph)


d.
C161206E07
2.708,0.094 3.292,0.292 0.583,0.198 10 false 1 V/DIV. 1.594,1.688 2.594,1.896 1,0.208 10 false 10 msec./DIV. 2.99,1.365 3.344,1.563 0.354,0.198 10 false GND

Using an oscilloscope, check waveform 4.

Reference
Terminal No. (Symbol) Tool Setting Condition
G90-21 (CAN+) - C77-1 (E1) 1 V/DIV., 10 msec./DIV. Ignition switch ON


e.
C161207E07
2.708,0.094 3.292,0.292 0.583,0.198 10 false 1 V/DIV. 1.594,1.688 2.646,1.885 1.052,0.198 10 false 10 msec./DIV. 2.99,1.354 3.344,1.552 0.354,0.198 10 false GND

Using an oscilloscope, check waveform 5.

Reference
Terminal No. (Symbol) Tool Setting Condition
G90-20 (CAN-) - C77-1 (E1) 1 V/DIV., 10 msec./DIV. Ignition switch ON