Home › Drivetrain › VF2CM TRANSFER / 4WD / AWD › TRANSFER OIL
RM33J0E _52 Drivetrain _038470 VF2CM TRANSFER / 4WD / AWD _0194117 TRANSFER OIL G

VF2CM TRANSFER / 4WD / AWD  TRANSFER OIL  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK TRANSFER OIL

a.
C325880C01
2.438,1.771 2.219,1.771 2.219,1.771 2.021,1.438 true 2.51,1.677 2.823,1.875 0.313,0.198 10 false *1
*1 Filler Plug


Remove the filler plug and gasket.


b.
C282090C02
2.646,0.875 2.958,1.031 0.313,0.156 10 false *a
*a 0 to 5.0 mm


Check that the oil level is between 0 to 5.0 mm (0 to 0.196 in.) from the bottom lip of the filler plug hole.

If the result is not as specified, add transfer oil.

Oil grade:

Toyota Genuine Transfer Gear Oil LF or Equivalent


Viscosity:

SAE 75W


NOTICE:

Too much or too little oil will lead to transfer problems.



c.

When the oil level is too low, check for oil leakage.


d.

Install a new gasket to the filler plug, and then install the filler plug.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)