Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › INTAKE AIR TEMPERATURE SENSOR
RM33J0E _51 Engine / Hybrid System _038428 1KD-FTV ENGINE CONTROL _0195863 INTAKE AIR TEMPERATURE SENSOR A

1KD-FTV ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 89424A 2.REMOVE INTAKE AIR TEMPERATURE SENSOR

a.
A211878

Disconnect the intake air temperature sensor connector.


b.

Using a 22 mm deep socket wrench, remove the intake air temperature sensor and gasket from the intercooler assembly.

HINT:

Replace the intake air temperature sensor if it is deformed, cracked or malfunctioning. It is not necessary to replace the intake air temperature sensor each time the intercooler assembly is replaced.