Home › Engine / Hybrid System › 2KD-FTV ENGINE CONTROL › ECD SYSTEM
RM33J0E _51 Engine / Hybrid System _038446 2KD-FTV ENGINE CONTROL _0195892 ECD SYSTEM D

2KD-FTV ENGINE CONTROL  ECD SYSTEM  SYSTEM DESCRIPTION  


ENGINE CONTROL SYSTEM


A269770C01
6.063,1.865 6.188,1.771 false 6.052,2.094 6.26,2.438 true 5.771,2.51 5.896,2.438 true 4.688,2.479 4.823,2.521 true 5.833,5.208 5.958,5.115 true 3.427,4.531 3.604,4.438 true 5.146,5.594 5.531,5.802 true 4.479,6.865 4.792,6.865 true 4.563,5.813 4.719,5.677 true 4.656,5.031 5.042,5.24 true 2.042,2.271 2.354,2.427 0.313,0.156 10 false *1 2.052,2.802 2.365,2.958 0.313,0.156 10 false *2 1.396,1.104 1.708,1.26 0.313,0.156 10 false *3 0.438,1.917 0.75,2.073 0.313,0.156 10 false *4 0.438,2.125 0.75,2.281 0.313,0.156 10 false *5 0.438,2.344 0.75,2.5 0.313,0.156 10 false *6 0.438,2.594 0.75,2.75 0.313,0.156 10 false *7 0.438,2.833 0.75,2.99 0.313,0.156 10 false *8 0.438,3.052 0.75,3.208 0.313,0.156 10 false *9 0.365,3.271 0.833,3.427 0.469,0.156 10 false *10 5.792,0.385 6.26,0.542 0.469,0.156 10 false *11 6.198,1.677 6.667,1.833 0.469,0.156 10 false *12 6.198,2.448 6.667,2.604 0.469,0.156 10 false *13 5.375,1.563 5.844,1.719 0.469,0.156 10 false *14 3.958,1.781 4.427,1.938 0.469,0.156 10 false *15 4.458,2.396 4.927,2.552 0.469,0.156 10 false *16 5.865,2.323 6.333,2.479 0.469,0.156 10 false *17 5.188,2.469 5.656,2.625 0.469,0.156 10 false *18 4.354,3.302 4.823,3.458 0.469,0.156 10 false *19 3.823,3.031 4.292,3.188 0.469,0.156 10 false *20 5.875,4.198 6.344,4.354 0.469,0.156 10 false *21 5.958,5 6.427,5.156 0.469,0.156 10 false *22 3.208,4.458 3.677,4.615 0.469,0.156 10 false *23 4.427,4.927 4.896,5.083 0.469,0.156 10 false *24 3.281,5.271 3.75,5.427 0.469,0.156 10 false *25 4.344,5.76 4.813,5.917 0.469,0.156 10 false *26 4.146,6.396 4.615,6.552 0.469,0.156 10 false *27 4.26,6.771 4.729,6.927 0.469,0.156 10 false *28 5.552,5.74 6.021,5.896 0.469,0.156 10 false *29 6.188,6.333 6.656,6.49 0.469,0.156 10 false *30
*1 ECM *2 Atmospheric Pressure Sensor
*3 Accelerator Pedal Position Sensor *4 Ignition Switch Signal
*5 Starter Signal *6 Vehicle Speed Signal
*7 DLC3 *8 Battery Voltage
*9 Stop Light Switch *10 Other Signal
*11 Fuel Tank *12 Suction Control Valve
*13 Fuel Temperature Sensor *14 Fuel Supply Pump Assembly
*15 Generator *16 Fuel Pressure Sensor
*17 Pressure Discharge Valve *18 Common Rail Assembly
*19 Injector Driver *20 EDU Relay
*21 Diesel Throttle Body Assembly *22 Manifold Absolute Pressure Sensor
*23 Intake Air Temperature Sensor *24 Injector Assembly
*25 Turbocharger Sub-Assembly *26 Engine Coolant Temperature Sensor
*27 Camshaft Position Sensor *28 Crankshaft Position Sensor
*29 Glow Plug *30 Glow Plug Relay (GLOW)



COMMON RAIL SYSTEM DESCRIPTION


COMMON RAIL SYSTEM:

The common rail system uses high-pressure fuel to improve fuel economy and to provide robust engine power, while suppressing engine vibration and noise.

This system stores fuel, which has been pressurized and supplied by the fuel supply pump assembly, in the common rail. By storing fuel at high-pressure, the common rail system can provide fuel at stable fuel injection pressures, regardless of engine speed or engine load.

The ECM regulates the fuel injection timing and volume by using the EDU to provide an electric current to the solenoid valve in the injector assembly. The ECM also monitors the internal fuel pressure of the common rail using the fuel pressure sensor. The ECM causes the fuel supply pump assembly to supply the fuel necessary to obtain the target fuel pressure.

In addition, this system has a 2-Way Valve (TWV) inside the injector assembly to open and close the fuel passage. As a result, both fuel injection timing and fuel injection volume can be precisely regulated by the ECM.

The common rail system provides two split fuel injections. In order to soften combustion shock, this system performs "pilot-injection" as the subsidiary fuel injection prior to the main fuel injection. This helps to reduce engine vibration and noise.

A154086E07
1.75,1.302 1.729,0.906 1.729,0.906 1.583,0.906 false 1.76,2.198 2.073,1.833 2.073,1.833 1.875,1.833 false 0.969,2.615 0.635,3 false 2.24,1.292 2.354,1.063 2.354,1.063 2.458,1.063 false 5.042,1.302 4.583,0.76 4.583,0.76 4.365,0.76 false 4.854,4.854 5.302,5.031 0.448,0.177 10 false ECM 6.271,4.844 6.771,5.052 0.5,0.208 10 false Sensor 0.083,0.063 3.219,0.448 3.135,0.385 10 false Common Rail System Diagram (Fuel System) 0.219,0.823 1.635,1.01 1.417,0.188 10 false Fuel Pressure Sensor 2.5,0.99 4.208,1.229 1.708,0.24 10 false Common Rail Assembly 2.729,0.688 4.365,0.969 1.635,0.281 10 false Pressure Discharge Valve 4.656,0.479 6.01,0.75 1.354,0.271 10 false : High-pressure Area 0.281,1.75 1.906,2.063 1.625,0.313 10 false Fuel Temperature Sensor 0.156,3.021 1.229,3.5 1.073,0.479 10 false Fuel Supply Pump Assembly 0.844,4.281 2.24,4.479 1.396,0.198 10 false Fuel Filter Assembly 1.229,4.729 1.896,4.969 0.667,0.24 10 false Fuel Tank 3.625,4.542 3.948,4.719 0.323,0.177 10 false EDU 5.583,3.406 6.927,3.646 1.344,0.24 10 false Injector Assembly

COMMON RAIL SYSTEM COMPONENTS:
Component Description
Common rail assembly Stores high-pressure fuel produced by fuel supply pump assembly
Fuel supply pump assembly Operated by crankshaft. Supplies high-pressure fuel to common rail assembly.
Injector assembly Injects fuel to combustion chamber based on signals from ECM
Fuel pressure sensor Monitors internal fuel pressure of common rail and sends signals to ECM
Pressure discharge valve Based on signals from the ECM, opens valve when sudden deceleration is occurred, or when the ignition switch is OFF to prevent the fuel pressure from becoming too high.
Suction control valve Based on signals from ECM, adjusts fuel volume supplied to common rail and regulates internal fuel pressure


DIAGNOSTIC TROUBLE CODE (DTC) TABLE FOR COMMON RAIL SYSTEM:
HINT:

This table indicates typical DTC combinations for each malfunction occurrence.


Trouble Area Malfunction DTC No.
Injector assembly Open or short in injector circuit P0200, P0093*
Stuck open P0093
Stuck closed -
Fuel pressure sensor Open or short in fuel pressure sensor circuit or pressure sensor output fixed P0087, P0190, P0191, P0192, P0193
Pressure discharge valve Open or short in pressure discharge valve circuit P1271, P1272, P0088*, P0093*, P1229*
Stuck open P0093
Stuck closed P1272, P0088*
Suction control valve Open or short in suction control valve circuit P0627, P1229, P0088*
Stuck open P1229, P0088*
Stuck closed -
EDU Faulty EDU P0093*, P0200*, P1271*, P1272*
Common rail system (Fuel system) Fuel leaks in high-pressure areas P0093

HINT:

*: There may be no DTC output depending on the condition of the malfunction.



DIAGNOSTIC TROUBLE CODE DESCRIPTION FOR COMMON RAIL SYSTEM:
DTC No. Description
P0087 Fuel pressure sensor output does not change
P0088 Internal fuel pressure too high (200000 kPa [2039 kgf/cm2, 29007 psi] or more)
P0093 Fuel leaks in high-pressure areas
P0190 Open or short in fuel pressure sensor circuit (Low or high output)
P0191 Fuel pressure sensor out of range (Low output)
P0192 Open or short in fuel pressure sensor circuit (High output)
P0193 Open or short in fuel pressure sensor circuit (Sensor 1 and/or 2 relation)
P0200 Open or short in EDU or injector circuit
P0627 Open or short in suction control valve circuit
P1229 Fuel over-feed
P1271 Open or short in pressure discharge valve circuit
P1272 Closed malfunction of the pressure discharge valve


INJECTION CONTROL SYSTEM DESCRIPTION


The ECM controls the fuel injection system by using the injectors and fuel supply pump assembly. The ECM regulates the fuel injection volume and fuel injection timing by controlling both the duration and timing of energizing to the solenoid valve in the injector assembly. The ECM regulates injection pressure by controlling the suction control valve located in the fuel supply pump assembly.

The feed pump is used to pump fuel from the fuel tank to the fuel supply pump assembly.


A148213E12
5.927,5.177 6.125,5.177 false 5.906,3.74 6.271,4.01 false 5.938,3.229 6.302,3.229 false 6,2.74 6.438,2.656 false 5.927,2.302 6.406,1.802 false 5.948,1.969 6.271,1.25 false 5.771,2.979 5.26,2.667 false 3.865,4.177 3.781,3.396 3.781,3.396 3.625,3.396 false 2.76,4.479 2.698,3.396 2.698,3.396 2.594,3.396 false 2.302,4.76 2.479,5.229 false 3.771,4.708 2.771,5.927 false 4.365,5.563 4.438,5.896 false 3.573,2.219 3.521,1.781 3.521,1.781 3.406,1.781 false 6.271,1.25 6.354,1.25 false 0.104,1.167 1.208,1.604 1.104,0.438 10 false Accelerator Pedal Position Sensor 0.115,0.063 1.948,0.313 1.833,0.25 10 false Injection Control Diagram 5.375,5.552 6.719,5.781 1.344,0.229 10 false Injector Assembly 6.188,5.104 7.156,5.313 0.969,0.208 10 false Nozzle Needle 6.333,3.958 6.823,4.156 0.49,0.198 10 false Piston 6.365,3.167 6.958,3.531 0.594,0.365 9 false Control Chamber 6.49,2.583 6.948,2.781 0.458,0.198 10 false Orifice 4.844,2.552 5.323,2.729 0.479,0.177 10 false Orifice 6.448,1.74 6.875,1.938 0.427,0.198 10 false TWV 6.396,1.125 6.99,1.49 0.594,0.365 10 false Solenoid Valve 3.74,1.469 4.125,1.667 0.385,0.198 10 false EDU 3.302,2.49 4.188,2.854 0.885,0.365 10 false Common Rail Assembly 2.052,1.688 3.49,1.885 1.438,0.198 10 false Fuel Pressure Sensor 4.167,5.906 5.073,6.115 0.906,0.208 10 false Check Valve 3.115,3.302 3.667,3.51 0.552,0.208 10 false Plunger 2.24,5.938 3.198,6.135 0.958,0.198 10 false Eccentric Cam 2.354,5.24 3.115,5.458 0.76,0.219 10 false Feed Pump 2.125,3.156 2.604,3.74 0.479,0.583 10 false Suction Control Valve 0.198,4.281 1.188,4.479 0.99,0.198 10 false Other Sensors 0.854,5.813 1.604,6.01 0.75,0.198 10 false Fuel Tank 0.104,3.542 1.313,4.042 1.208,0.5 10 false Crankshaft Position Sensor (NE Signal) 0.104,2.344 1.24,2.781 1.135,0.438 10 false Camshaft Position Sensor 1.563,2.479 1.927,2.667 0.365,0.188 10 false ECM

FUEL SUPPLY PUMP OPERATION SYSTEM DESCRIPTION


The rotation of the eccentric cam in the fuel supply pump assembly causes the ring cam in the supply pump to push plunger A upward as illustrated below. The spring force pulls plunger B (located opposite to plunger A) upward. As a result, plunger B draws the fuel in and plunger A pumps fuel out at the same time.

A148214E18
0.469,2.104 0.469,1.135 0.469,1.135 0.583,1.135 false 1.531,1.01 2.354,0.49 2.354,0.49 2.521,0.49 false 2.365,0.49 2.198,1.01 false 1.865,1.427 3.031,0.844 false 1.99,1.938 3.052,1.427 false 2.083,2.198 2.969,2.708 false 1.917,2.542 2.948,3.135 false 0.99,2.833 0.99,3.427 0.99,3.427 0.844,3.427 false 0.063,0.052 3.865,0.344 3.802,0.292 10 false Fuel Supply Pump Operation Diagram 0.625,0.979 1.115,1.531 0.49,0.552 10 false Suction Control Valve 2.573,0.427 3.531,0.635 0.958,0.208 10 false Check Valve 3.094,0.729 3.885,0.948 0.792,0.219 10 false Plunger A 3.094,1.354 4.208,1.563 1.115,0.208 10 false Eccentric Cam 2.896,1.781 4.573,1.99 1.677,0.208 10 false to Common Rail Assembly 3.042,2.656 3.74,2.854 0.698,0.198 10 false Ring Cam 3.031,3.104 3.688,3.313 0.656,0.208 10 false Plunger B 1.104,3.156 2.865,3.365 1.76,0.208 10 false Plunger A: Pumping End 1.104,3.469 2.969,3.677 1.865,0.208 10 false Plunger B: Suction End 0.115,3.167 0.75,3.646 0.635,0.479 10 false from Feed Pump 4.958,3.156 6.771,3.365 1.813,0.208 10 false Plunger A: Suction Start 4.958,3.5 6.781,3.719 1.823,0.219 10 false Plunger B: Pumping Start 4.958,6.708 6.625,6.917 1.667,0.208 10 false Plunger A: Suction End 4.948,7.115 6.76,7.333 1.813,0.219 10 false Plunger B: Pumping End 1.052,6.719 3.125,6.927 2.073,0.208 10 false Plunger A: Pumping Start 1.052,7.115 3.125,7.323 2.073,0.208 10 false Plunger B: Suction Start


SUCTION CONTROL VALVE OPERATION SYSTEM DESCRIPTION


HINT:

The ECM controls the suction control valve operation to regulate the fuel volume that is pumped by the fuel supply pump assembly to the common rail. This control is performed to adjust the internal fuel pressure of the common rail to the targeted injection pressure.


a.

Small opening of the suction control valve:

i.

When the opening of the suction control valve is small, the fuel suction path is kept narrow. Therefore the transferable fuel volume is reduced (*A).


ii.

The suction volume becomes small due to the narrow path despite the plunger stroke being full. The difference between the geometrical volume and suction volume creates a vacuum (*B).


iii.

Pumping will start when the fuel pressure becomes higher than the common rail pressure (*C).

A148215E07
1.427,2.688 1.24,3.042 false 1.396,2.479 1.094,2.177 false 1.854,2.552 2.25,2.229 2.25,2.229 2.396,2.229 false 2.49,2.552 2.25,2.229 false 3.552,1.115 3.927,0.531 3.927,0.531 3.656,0.531 false 4.552,1.115 4.75,0.823 4.75,0.823 4.938,0.823 false 1.99,1.104 1.99,0.823 1.99,0.823 1.781,0.823 false 0.073,0.083 3.542,0.333 3.469,0.25 10 false Suction Control Valve Operation at Small Opening 0.177,0.729 1.781,1.021 1.604,0.292 10 false Plunger Top-dead Center 1.823,0.427 3.677,0.635 1.854,0.208 10 false Plunger Bottom-dead Center 5.031,0.729 6.469,0.938 1.438,0.208 10 false Pumping Starting Point 4.458,1.958 4.781,2.177 0.323,0.219 10 false (*C) 3.469,1.958 3.75,2.156 0.281,0.198 10 false (*B) 1.885,1.958 2.188,2.156 0.302,0.198 10 false (*A) 2.417,2.135 3.281,2.333 0.865,0.198 10 false Check Valve 0.573,1.385 1.375,1.594 0.802,0.208 10 false Cam Stroke 0.073,2.063 1.052,2.417 0.979,0.354 10 false Suction Control Valve 0.563,3.042 1.573,3.302 1.01,0.26 10 false Small Opening 5.573,0.219 7.083,0.427 1.51,0.208 10 false : Fuel Pumping Volume 5.24,3.51 5.563,3.729 0.323,0.219 10 false (*C) 3.688,3.531 3.969,3.729 0.281,0.198 10 false (*B) 1.99,3.479 2.292,3.677 0.302,0.198 10 false (*A)



b.

Large opening of the suction control valve:

i.

When the opening of the suction control valve is large, the fuel suction path is kept wide. Therefore the transferable fuel volume is increased (*D).


ii.

If the plunger stroke is full, the suction volume becomes large because of the wide path (*E).


iii.

Pumping will start when the fuel pressure becomes higher than the common rail pressure (*F).

A148216E10
1.438,2.51 1.188,2.198 false 1.448,2.656 1.198,3.042 false 3.552,1.083 3.26,0.771 false 0.073,0.094 3.583,0.344 3.51,0.25 10 false Suction Control Valve Operation at Large Opening 1.76,0.698 3.26,0.917 1.5,0.219 10 false Pumping Starting Point 5.604,0.146 7.135,0.344 1.531,0.198 10 false : Fuel Pumping Volume 0.729,1.406 1.5,1.625 0.771,0.219 10 false Cam Stroke 0.177,2.094 1.156,2.521 0.979,0.427 10 false Suction Control Valve 0.219,2.958 1.198,3.281 0.979,0.323 10 false Large Opening 1.875,1.938 2.208,2.135 0.333,0.198 10 false (*D) 3.458,1.938 3.771,2.146 0.313,0.208 10 false (*E) 3.76,1.938 4.063,2.156 0.302,0.219 10 false (*F) 2.042,3.521 2.396,3.75 0.354,0.229 10 false (*D) 4,3.583 4.313,3.792 0.313,0.208 10 false (*E) 5.719,3.563 6.021,3.781 0.302,0.219 10 false (*F)