Home › Engine / Hybrid System › 2KD-FTV ENGINE CONTROL › DIESEL THROTTLE BODY
RM33J0E _51 Engine / Hybrid System _038446 2KD-FTV ENGINE CONTROL _0195893 DIESEL THROTTLE BODY A

2KD-FTV ENGINE CONTROL  DIESEL THROTTLE BODY  INSTALLATION  


PROCEDURE

Hide 26100G 1.INSTALL DIESEL THROTTLE BODY ASSEMBLY

a.

Install a new gasket to the intake air connector.


b.

Install the diesel throttle body assembly with the 2 bolts and 2 nuts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


c.

Connect the diesel throttle body 2 connectors.


Hide 17806 2.INSTALL NO. 1 INTAKE PIPE

a.

Connect the No. 1 intake pipe with the No. 1 air hose, No. 2 air hose and install the bolt.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


b.

Tighten the 2 hose clamps.

Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)


c.

Connect the vacuum hose to the gas filter.


d.

Connect the manifold absolute pressure sensor connector.


Hide 3.PERFORM DIESEL THROTTLE BODY INITIALIZATION