Home › Engine / Hybrid System › 2KD-FTV ENGINE CONTROL › CAMSHAFT POSITION SENSOR
RM33J0E _51 Engine / Hybrid System _038446 2KD-FTV ENGINE CONTROL _0195897 CAMSHAFT POSITION SENSOR A

2KD-FTV ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 11301K 1.REMOVE CAMSHAFT POSITION SENSOR

a.
A349175

Disconnect the camshaft position sensor connector.


b.

Remove the bolt and camshaft position sensor from the timing gear cover.