Home › Engine / Hybrid System › 1GD-FTV ENGINE MECHANICAL › DRIVE BELT
RM33J0E _51 Engine / Hybrid System _038421 1GD-FTV ENGINE MECHANICAL _0196020 DRIVE BELT A

1GD-FTV ENGINE MECHANICAL  DRIVE BELT  INSTALLATION  


PROCEDURE

Hide 16361A 1.INSTALL FAN AND GENERATOR V BELT

a.

Rotate the pulley of the V-ribbed belt tensioner assembly clockwise, and then install the fan and generator V belt.

NOTICE:

Make sure that the fan and generator V belt is set properly on each pulley.


HINT:

When installing the fan and generator V belt, attach the fan and generator V belt to the No. 1 idler pulley sub-assembly last.