Home › Engine / Hybrid System › 1KD-FTV FUEL › FUEL INJECTOR
RM33J0E _51 Engine / Hybrid System _038430 1KD-FTV FUEL _0196040 FUEL INJECTOR G

1KD-FTV FUEL  FUEL INJECTOR  INSPECTION  


PROCEDURE

Hide 23670 1.INSPECT INJECTOR ASSEMBLY

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 0.42 to 0.52 Ω


If the result is not as specified, replace the injector assembly.