Home › Engine / Hybrid System › 1KD-FTV FUEL › COMMON RAIL
RM33J0E _51 Engine / Hybrid System _038430 1KD-FTV FUEL _0196042 COMMON RAIL G

1KD-FTV FUEL  COMMON RAIL  INSPECTION  


PROCEDURE

Hide 23810A 1.INSPECT COMMON RAIL ASSEMBLY

a.

Inspect the fuel pressure sensor.

i.
A075928C02
0.104,0.104 0.292,0.26 0.188,0.156 10 false *a
*a Component without harness connected
(Common Rail Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 25°C (77°F) 16.4 kΩ or less
5 - 4 25°C (77°F) 16.4 kΩ or less
1 - 2 25°C (77°F) 3 kΩ or less
6 - 5 25°C (77°F) 3 kΩ or less


If the result is not as specified, replace the common rail assembly.



b.

Inspect the pressure discharge valve.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 0.85 to 1.05 Ω


If the result is not as specified, replace the common rail assembly.