Home › Engine / Hybrid System › 2KD-FTV FUEL › INJECTOR DRIVER
RM33J0E _51 Engine / Hybrid System _038448 2KD-FTV FUEL _0196052 INJECTOR DRIVER A

2KD-FTV FUEL  INJECTOR DRIVER  INSTALLATION  


PROCEDURE

Hide 89879B 1.INSTALL INJECTOR DRIVER BRACKET

a.

for LHD:

i.

Install the injector driver bracket to the injector driver with the 3 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)



b.

for RHD:

i.

Install the 2 injector driver brackets to the injector driver with the 4 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)



Hide 2.INSTALL INJECTOR DRIVER ASSEMBLY

a.

for LHD:

i.

Install the injector driver assembly to the body with the 2 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


ii.

Connect the 3 injector driver connectors to the injector driver.



b.

for RHD:

i.

Install the injector driver assembly to the body with the 2 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


ii.

Attach the clamp and connect the wire harness to the injector driver bracket.


iii.

Connect the 3 injector driver connectors to the injector driver.