Home › Engine / Hybrid System › 1GD-FTV LUBRICATION › OIL PRESSURE SWITCH
RM33J0E _51 Engine / Hybrid System _038426 1GD-FTV LUBRICATION _0196265 OIL PRESSURE SWITCH G

1GD-FTV LUBRICATION  OIL PRESSURE SWITCH  INSPECTION  


PROCEDURE

Hide 83530 1.INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.

Disconnect the engine oil pressure switch connector.


b.

Start the engine.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - Body ground Engine stopped Below 1 Ω
Engine idling 10 kΩ or higher


If the result is not as specified, replace the engine oil pressure switch assembly.


d.

Connect the engine oil pressure switch connector.