The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the cruise control main switch removal/installation are shown below.
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.
for Type A:
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(for Type A)>PRECAUTION
for Type B:
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(for Type B)>PRECAUTION
45130
1.REMOVE HORN BUTTON ASSEMBLY
84632
2.REMOVE CRUISE CONTROL MAIN SWITCH
Remove the 2 screws.
Disconnect the connector and remove the cruise control main switch.
Disconnect the connector and remove the cruise control switch wire from the cruise control main switch.