Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for Seat Cushion 60/40 Split Type)
RM33J0E _58 Vehicle Interior _038502 SEAT _0197341 REAR SEAT ASSEMBLY(for Seat Cushion 60/40 Split Type) A

SEAT  REAR SEAT ASSEMBLY(for Seat Cushion 60/40 Split Type)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 71397B 1.INSTALL REAR SEATBACK HOLDER RH

NOTICE:
·

Perform the following only when replacing the rear seatback holder RH.

·

Do not reuse the rear seatback holder RH after removing it.



a.
B407404C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw to install 2 new rear seatback holder RH.


Hide 2.INSTALL REAR SEAT ASSEMBLY

a.

Place the rear seat assembly in the cabin.

NOTICE:
·

Installing the rear seat assembly from the vehicle must be performed by multiple people.

·

Do not damage the rear seat assembly, body exterior or vehicle interior.




b.
B402735C01
1.083,1.594 1.281,1.802 0.198,0.208 10 true (1) 0.865,2.271 1.063,2.479 0.198,0.208 10 true (2) 2.531,1.646 2.729,1.854 0.198,0.208 10 true (3) 2.323,2.344 2.521,2.552 0.198,0.208 10 true (4) 1.438,2.094 1.635,2.302 0.198,0.208 10 true (5)
V113147

Install in this Direction


Push in the installation direction shown in the illustration and attach the hook to install the rear seat assembly.


c.

Temporarily install the rear seat assembly with the 5 bolts.


d.

Tighten the 5 bolts in the order shown in the illustration.

Torque:
19.5 N*m (199 kgf*cm, 14 ft.*lbf)


e.
B410490C01
0,0 0,0 false
V113147

Install in this Direction


w/o Center Headrest:

Pass the 3 inner belt buckles through the elastic strap of the seatback and connect them to the seatback.


f.
B407405C01
0,0 0,0 false
V113147

Install in this Direction


w/ Center Headrest:

Pass the 4 inner belt buckles through the elastic strap of the seatback and connect them to the seatback.


g.
B402736

Detach the 2 No. 1 fold seat stopper band assemblies from the stay of the rear seat headrest assembly.


h.

Return the 2 rear seat cushion assemblies to its original position to lock the 2 seat cushion locks.


i.
B407406C01
0,0 0,0 false
V113147

Install in this Direction


w/ Center Headrest:

Connect the rear seat center outer belt to the buckle.