This DTC is output when a malfunction is detected in the 4 wheel drive control ECU internal circuit.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P163B | 4WD ECU Malfunction | ·
Diagnosis Condition: Directly after the ignition switch is turned to ON, or when switching operations are performed with the ignition switch turned to ON ·
Malfunction Status: 4 wheel drive control ECU internal circuit malfunction ·
Malfunction Time: 0.5 seconds or more (directly after the ignition switch is turned to ON, 0.05 seconds or more) ·
Other: 1 trip detection logic |
4 wheel drive control ECU |
Check whether DTCs other than C163B are output.
Click hereDrivetrain>VF2CM TRANSFER / 4WD / AWD>TOUCH SELECT 2-4 AND HIGH-LOW SYSTEM>DTC CHECK / CLEAR
| Result | Proceed to |
|---|---|
| Only DTC C163B is output. | A |
| DTCs (Touch Select 2-4 and High-Low System) other than DTC C163B are output. | B |
| DTCs (Differential System (w/ Differential Lock)) other than DTC C163B are output. | C |
A
B
C