33411A
1.INSTALL COUNTER GEAR FRONT BEARING
Using SST and a press, press in a new counter gear front bearing to the counter gear.
Install the counter gear front bearing so that the No. 2 counter gear front bearing snap ring groove of the bearing faces forward.
33411Q
2.INSTALL NO. 2 COUNTER GEAR FRONT BEARING SNAP RING
Select a No. 2 counter gear front bearing snap ring so that the clearance between the counter gear and No. 2 counter gear front bearing snap ring is within the specification.
0.10 mm (0.00393 in.) or less
| Thickness |
|---|
| 2.05 to 2.10 mm (0.0808 to 0.0826 in.) |
| 2.10 to 2.15 mm (0.0827 to 0.0846 in.) |
| 2.15 to 2.20 mm (0.0847 to 0.0866 in.) |
| 2.20 to 2.25 mm (0.0867 to 0.0885 in.) |
| 2.25 to 2.30 mm (0.0886 to 0.0905 in.) |
| 2.30 to 2.35 mm (0.0906 to 0.0925 in.) |
Using a snap ring expander, install the No. 2 counter gear front bearing snap ring.